Select your product to confirm this information applies to you
zumo R1 Radar Won't Power on
See below for troubleshooting steps if your zūmo™ R1 Radar Motorcycle Radar won't power on.
Verify the zūmo R1 Radar is Installed Properly
Ensure the radar was installed according to the instructions in the owner's manual
Turn on the motorcycle
The radar should power on with the motorcycle when connected properly.
Restart the Device
A restart can help by forcing the device to reboot if it still does not power on, the device stops responding, or the status LED is solid red.
Hold the device button for 10 seconds
Release the device button
The device should now turn on.
My Device is Overheating
The radar screen in the zūmo™ Radar app or on your motorcycle navigator may be showing an overheating symbol: 
The operating temperature range specification for the device is from -20° to 55°C (from -4° to 131°F). The status LED turns red and an icon is displayed in the zūmo Radar app or on your motorcycle navigator when your device is overheating and could indicate that the device is operating outside this range. The zūmo Radar system is not operational when this icon is displayed and the status LED is red.
Ensure your device is mounted as far away from heat sources on the motorcycle as possible
Avoid parking your motorcycle with the device in direct sunlight