Perform Master Reset on a BMW Motorrad Navigator V/VI

Note: A master reset will erase your saved information and restore the device to the default factory settings. This will include all saved locations¹, trips, and tracks. If you would like to back up your saved information to your computer, see related content below:

To Perform a Master Reset on a BMW Motorrad Navigator V/VI Device:

1. Start with the device off and unplugged from power
   • To verify the device is powered off and not in standby mode, touch and hold down the power button until prompted to turn off the device
2. Touch and hold the lower right hand corner of the display portion of the touchscreen
3. Power on the device
4. "System" will appear on the screen for approximately 30 seconds
5. Remove your finger when the screen displays "Loading..."

The device will automatically reset. Follow the on screen prompts to set your locale and then place your device in an area with a clear view of the sky until it acquires satellites.

¹Although the master reset may erase all saved saved locations, any loaded custom points of interest will remain intact on the device.