Select your product to confirm this information applies to you

How to Replace the Mounting Tabs on Edge 1050

The mounting tabs on the back of the Edge® 1050 cycling computer are user-replaceable. 

Parts needed

  • T6 Torx Screwdriver

  • Quarter Turn Mount Kit (S00-02545-00)


Steps to Replace

  1. Using the T6 torx screwdriver, remove the mounting tab by removing the two screws holding it in place.

  2. Place the new mounting tab on and secure it with the new screws. New screws will have a thread-locking adhesive applied to the threads.

  3. To ensure the screws are tightened enough, there should be no movement between the tabs and Edge.