Select your product to confirm this information applies to you
Garmin Pedal Power Meter Calibration Error Codes
The following error codes may be displayed during the calibration of Rally and Vector 3 Power Meter pedals. A code value can be a combination of two error codes added together. See the meaning along with the corrective action for each error code to solve any issue you are having during calibration:
NOTE: Do not use Pedal Extenders as they may cause calibration issues in addition to damage to the pedals.
| Code | Meaning | Corrective Action |
|---|---|---|
| 1 | Calibration in Progress on left pedal | Calibration already in progress |
| 2 | Calibration timeout on left pedal | Make sure pedals are stationary and under no load |
| 3 | Calibration failure due to failed upright check on left pedal | Position bike in an upright position |
| 4 | Calibration aborted due to pedaling | Make sure pedals are awake by spinning the crank and try again |
| 8 | Calibration request could not be sent to right pedal | |
| 16 | Calibration request was sent to the right pedal but no response was received | |
| 32 | Calibration failure due to failed upright check on left pedal | Position bike in an upright position |
| 64 | Installation angle parameters not recognized on left pedal | Make sure pedals are awake by spinning the crank and try again |
| 128 | Installation angle parameters timeout on left pedal | |
| 256 | Calibration in Progress on right pedal | Calibration already in progress |
| 257 | Calibration in Progress | |
| 258 | Calibration aborted due to pedaling on both pedals in progress | Make sure pedals are stationary, awake, in an upright position and under no load |
| 259 | Calibration failure due to failed upright check on left and right pedal in progress | |
| 260 | Calibration timeout on left pedal and right pedal in progress | |
| 512 | Calibration timeout on right pedal | Make sure pedals are awake by spinning the crank and try again |
| 513 | Calibration aborted due to pedaling on both pedals in progress | Make sure pedals are stationary, awake, in an upright position and under no load |
| 514 | Calibration aborted due to pedaling | Make sure pedals are stationary and under no load |
| 515 | Calibration failure due to failed upright check on right pedal and left pedal in progress | Make sure pedals are stationary, awake, in an upright position and under no load |
| 516 | Calibration timeout on right pedal and left pedal in progress | |
| 768 | Calibration failure due to failed upright check on right pedal | Position bike in an upright position |
| 769 | Calibration failure due to failed upright check on right pedal and in progress on left pedal | Make sure pedals are stationary, awake, in an upright position and under no load |
| 770 | Calibration failure due to failed upright check on right pedal and pedaling on left pedal | |
| 771 | Calibration failure due to failed upright check | Position bike in an upright position |
| 772 | Calibration timeout on right pedal and failed upright check on left pedal | Make sure pedals are stationary, awake, in an upright position and under no load |
| 1024 | Calibration aborted due to pedaling on right pedal | Make sure pedals are stationary and under no load |
| 1025 | Calibration timeout on right pedal and in progress on left pedal | Make sure pedals are stationary, awake, in an upright position and under no load |
| 1026 | Calibration timeout on right pedal and pedaling on left pedal | |
| 1027 | Calibration timeout on right pedal and failed upright check on left pedal | |
| 1028 | Calibration timeout | Make sure pedals are awake by spinning the crank and try again |
| 4096 | Calibration failure due to failed upright check on right pedal | Position bike in an upright position |
| 8192 | Installation angle parameters not recognized on right pedal | Make sure pedals are awake by spinning the crank and try again |
| 16384 | Installation angle parameters timeout on right pedal | Make sure pedals are awake by spinning the crank and try again |