Upgrading Vector S/2S to a Dual-Sensor System

Vector S/2S are single-sensor power meter systems that measure power from the left pedal to provide an approximate total power value. With Vector S/2S you have the option to upgrade to a dual-sensor system that will measure power from both pedals and provide additional metrics.

IMPORTANT: The Vector 2 system was discontinued in 2017 and may result in the inability to find available upgrade pedals to purchase.

To Upgrade Vector S/2S to a Dual-Sensing System

NOTE: Before upgrading your Vector S/2S system you will need to ensure that your crank arm and chain clearance are compatible by referring to your owner's manual.

1. Purchase Vector 2S Upgrade Pedal (010-12338-00) and ensure proper size for your crankarm¹.

2. Remove existing non-sensing right pedal.

3. Install² right Vector 2 Upgrade Pedal with new pedal pod.

4. Pair the Vector 2 pedals with Edge or compatible Forerunner².

5. Follow on-screen calibration instructions.

6. Check for software updates.

Having Trouble?

If the above steps do not successfully upgrade the Vector S/2S to a dual-sensor system Vector Updater can also be used:

1. Open Vector Updater.

2. Follow the on-screen prompts until Vector Updater says Pedal Found.

3. Click Pair Pedals and follow the on-screen prompts.

Once upgraded, Vector will provide left/right balance, increased power accuracy, and cycling dynamics in addition to Vector S/S2 metrics.

¹ Kits are available for Standard thickness and Large thickness crank arms.

² For instructions on installation and pairing your sensors with your device, refer to your owner's manual.