Select your product to confirm this information applies to you

How to Replace the Mounting Tabs on Edge 540 | 840 Series

The mounting tabs on the back of the following Edge Cycling computers are user-replaceable: 

  • Edge® 540 | Edge® 540 Solar 

  • Edge® 840 | Edge® 840 Solar

replacement tabs on edge 540 or 840


Required Tool:

  • Size 0 Philips Screwdriver

Replacement Part:

Part number S00-02030-00 can be purchased from Garmin here.


Steps to Replace:

  1. Using the Size 0 Philips screwdriver, remove the mounting tab by removing the two screws holding it in place.

  2. Place the new mounting tab on and secure using the new screws.  New screws will have a thread-locking adhesive applied to the threads.   

  3. To ensure the screws tightened enough, there should be no movement between the tabs and Edge.

    testing tabs for tightness

Mounting Tab Replacement Video: