Select your product to confirm this information applies to you

Replacing Vector3/3s Batteries

WARNING! See the Important Safety and Product Information guide in the product box for product warnings and other important information.

NOTE: Garmin® recommends replacing all of the batteries at the same time. Do not mix the battery types.

  1. Use a 4 mm hex key to remove the battery cover glyph icon

  2. Remove the batteries.

  3. Wait 5 to 10 seconds.

  4. Insert the new batteries into the battery cover, observing polarity. 

  5. Replace the battery cover, and hand tighten it 3 to 4 turns.

    NOTE: Do not damage or lose the O-ring gasket.

  6. Use a 4 mm hex key to tighten the battery cover.

    NOTE: Do not over-tighten the battery cover.

    The pedal LED flashes red once.