(2024) Service Bulletin 24004 Rev A: Approval of GDU™ 700 Display and GDU 1060 -X2 Part Numbers and G500H TXi Main Software Version 3.53

PRODUCTS AFFECTED:

G500H TXi systems installed using G500H TXi Part 27 AML STC SR02622SE are affected.

CERTIFICATION AUTHORIZATION:

STC SR02622SE MDL Rev 12

COMPLIANCE:

Optional: STC Service Bulletin 24004 may be incorporated at the owner’s discretion and is not warranty reimbursable.

DOCUMENTATION CONSIDERATIONS:

There are no recommended RFMS or Pilot’s Guide changes applicable to this bulletin. Applicable RFMS and ICA documents listed in Table 1, are required to be issued to the aircraft owner/operator before the aircraft is returned to service, if not already provided.

Table 1

At time of publication the current G500(H)/G600/G700 TXi Pilot’s Guide (P/N 190-01717-10) is Rev. N.

PURPOSE:

This STC Service Bulletin provides notification of an update to STC SR02622SE, G500H TXi Part 27 STC MDL Revision 12.

Major details of the update are:

• Approved -X2 GDU 700 and GDU 1060 Part Numbers

NOTE
Minimum GDU Main Software Version 3.53 and Boot Version 2.10 are both required for these part numbers. -X2 units are shipped from the factory with these software versions.

• Updated G500/G600 TXi main software to Software Version 3.53, which fixes an issue where the traffic page On Scene annunciation was not legible

WARRANTY INFORMATION:

This modification is not warranty reimbursable.