Select your product to confirm this information applies to you
Connecting the VIRB 360 to a Computer as a Removable Drive
By default, when the VIRB 360 is connected to power, it will remain off and enter Charge mode. This is indicated by the VIRB 360 showing only a large battery charge level indicator on the screen. See Charging the Battery for more information.
If you would like to connect the device as a removable drive on your computer, press and hold the Left/Power button until the camera comes on. See the instructions in the manual for more information.
To make the camera avoid charge mode by default:
- Power on the VIRB 360
- Use Left/Right buttons to select Setup
- Select System
- Select External Power
- Choose Power On
In this mode, you will need to manually power down your VIRB 360 to charge it.