Select your product to confirm this information applies to you
No Audio from a Zone or Channel on a Fusion® Stereo
If there is no audio coming from a zone or channel on a Fusion® stereo or speaker:
- Check that the volume on the zone is turned up
- Check that the stereo internal amplifier is turned on
- Check continuity of wire connecting the speaker to the stereo or amplifier
- Do not allow bare speaker wires to touch other metal parts or each other
- Move the speaker to a different channel to see if the problem follows the speaker or the channel
- Move a known-working speaker to the zone in question
- If an external amplifier is being used, check that the gain or level is turned up and that the amplifier is turning on properly