Select your product to confirm this information applies to you
Which Garmin Boat Switches Must Be Set to Momentary
All switches on the Garmin Boat Switch are configured as latching by default. The switches shown in this table must be configured as momentary in the Garmin chartplotter software for proper operation.
These switches must be manually configured as momentary. To do so follow these steps.
- From a Garmin chartplotter connected to the same NMEA 2000 network as the Garmin Boat Switch device and follow this path ۰۰۰ > Settings> My Vessel> Switching> NMEA Standard
- Select the switch number
- Select Configuration
- Select Momentary