Select your product to confirm this information applies to you
(2011) Service Advisory 1139 Rev A: G600/G500/G500H Systems Auto-Slewing
PRODUCTS AFFECTED
G600/G500/G500H Systems with GDU 620 Software Version 6.00 or earlier.
DESCRIPTION
The HSI course pointer auto-slew feature does not automatically select the final approach course for certain approaches. (Refer to the appropriate Pilot’s Guide for a detailed description of the auto-slew feature.) For affected approaches, the HSI course pointer will remain at the previously selected VLOC course; the pilot must manually select the final approach course.
PILOT ACTION
Pilots should be aware of the condition noted above. Pilots must verify proper course selection each time the CDI source is changed.
RESOLUTION
This issue will be corrected in a future GDU 620 software version.