Important Notice: Beware of Fake Garmin Ads!

Garmin Philippines has received reports of fraudulent websites and advertisements circulating on social media, claiming to sell Garmin products at discounted prices. Do not click on suspicious links or provide personal information on unverified sites.

Always shop through the official Garmin website. Your safety is our top priority.

Select your product to confirm this information applies to you

How to Set Up DSP Using FusionLink

The Fusion-Link app can be used to set up DSP (Digital Signal Processing) for compatible stereos and amplifiers.

Compatible DSP Stereos

Fusion Apollo MS-RA770

Fusion Apollo MS-RA670

Fusion Apollo MS-WB670 Hideaway Stereo

Fusion MS-RA210

Fusion RA70 Series

Fusion MS-RA60

Fusion MS-BB100 Black Box

Fusion Panel-Stereo

Setting up DSP for the Internal Amplifier:

  1. Connect the mobile device with the Fusion-Link application to the stereo using Wi-Fi or Bluetooth
  2. Open the Fusion-Link app and select the connected stereo if necessary
  3. Tap the Settings Menu gear in the upper right corner of the screen
  4. In the Music tab select the Zone the amplifier is connected to
  5. Select DSP Settings
  6. The app will notify that the DSP Setting Download is done, tap Close
  7. Select Internal Amplifier
  8. Tap Speaker Type and specify the installed speakers
  9. Tap Environment and choose the closest option to the area in which the speakers are installed
  10. If a second pair of speakers or a separate Tweeter is connected toggle the options on by tapping the switch 
  11. Return to the Zone menu and select Send DSP Settings
  12. Fusion-Link will notify Update Complete, tap Close

Setting up DSP for External Amplifiers

  1. Connect the mobile device with the Fusion-Link application to the stereo using Wi-Fi or Bluetooth
  2. Open the Fusion-Link app and select the connected stereo if necessary
  3. Tap the Settings Menu gear in the upper right corner of the screen
  4. In the Music tab select the Zone the amplifier is connected to
  5. Select DSP Settings
  6. The app will notify that the DSP Setting Download is done, tap Close
  7. Select External Amplifier 
  8. Tap Speaker Type and specify the installed speakers
  9. Tap Environment and choose the closest option to the area in which the speakers are installed
  10. Select External Amplifier to specify the amplifier 
  11. If a second pair of speakers or a separate Tweeter is connected toggle the options on by tapping the switch 
  12. If using a Signature, FM or AM Series amplifier, Fusion-Link will then provide the trimpot settings. These MUST be applied to the amplifier before sending DSP settings 
  13. If using an Apollo Series amplifier return to the Settings screen and tap Send DSP Settings
  14. Fusion-Link will notify Update Complete, tap Close
Contact Us for More Help