Select your product to confirm this information applies to you

Honda Navigation Map Update

Honda vehicles with Garmin Navigation come with 5 years of map updates at no cost.  These map updates are available roughly once per calendar year.  Starting in 2015, Garmin began providing navigation in select Honda vehicles. We do not provide navigation for all models of Honda vehicles in all countries after 2015. On our website, you may see a Honda vehicle listed that does not use Garmin navigation in your country or region.

Contact your local Honda dealership for additional information on how to update if you are unsure if your vehicle has Garmin navigation.

NOTE: You cannot use the same map download for multiple Honda navigation systems. Doing this will result in a locked navigation device.

If Your Vehicle is NOT Listed Below - Click Here for Map Update Instructions:

The following is needed to perform the map update:

  • 16 GB USB Drive Only
    • The Honda Navigation System update requires a 16GB USB flash drive. Using a USB flash drive smaller or larger than 16GB can cause the map update process to be unsuccessful. The following error message may display: "There is not enough space on the device to install the map update from USB storage device."
    • Using the Same USB Flash Drive for the Honda Map Update
  • High-speed Internet connection
  • Up to 4 hours of time (Computer and Vehicle).  The map download time varies based on Internet connection speed and map region.
    • The map installation will take up to one hour in the vehicle but may vary based on the map region being installed.
    • During this update, your Honda navigation system must not be turned off. Therefore, the engine must be running while the vehicle is parked outside or in a well-ventilated area. Before getting started, familiarize yourself with and follow all applicable laws in your area. Please contact your dealer with any questions or concerns.

NOTE: You cannot use the same map download for multiple Honda navigation systems. Doing this will result in a locked navigation device.

Map Update Instructions:

On the Computer

1. Format your USB drive to FAT32

    • NOTE: Steps 1 and 9 (using Garmin Express) must be done within 24 hours of each other when performing the map update. The update process will need to be restarted from the beginning if they are not completed within 24 hours.

2. Take the USB drive to your vehicle

In your Vehicle

The following steps are required in order to imprint a unique ID to the flash drive.

3. With the vehicle turned off, plug the 16 GB USB drive into the vehicle's USB port

    • For Honda Pilot 2016 - Use the USB port inside the center console

    • For Honda Accord 2016 and Honda Accord 2017 - Use the front USB port under your audio display

    • All other Honda vehicles - Any USB port in the vehicle can be used

4. Turn on the vehicle and Select Settings on the Navigation Home Screen

    • Select the View Map Screen and then Menu Button (3 dots) if Settings does not display on the Navigation Home Screen

5. Select Device

6. Select Update Map

7. Select OK

8. Select OK and wait 60 seconds before removing the USB drive from the USB port

9. Remove the USB drive from your vehicle and take the USB drive back to your computer

On your Computer

10. Plug the USB drive into your computer

11. Open Garmin Express

12. Select Add a Device

    • If you've previously added your device to Garmin Express, select on your device and skip to step 15.
      • The green dot means Garmin Express recognizes the device.

13. Select Add Device

14. Select Next

    • If desired, enter your email address to register the device and receive map update notifications

15. Select Next

    • If desired, enter a nickname for your vehicle

16. Select Install

    • Information about the available update can be found by clicking View Details
    • NOTE: For 2015 and 2016 Honda Vehicles: If following the instructions below doesn't offer a map update, contact Product Support

17. Select Accept after reading the terms and conditions

18. Select Continue after reading the important notes

    • Garmin Express will now display Preparing Device for Map Update and then Garmin Express is copying the map update files on to the USB drive

19. Safely remove the USB drive from the computer once the update process is completed and take the USB drive back to your vehicle

In your Vehicle

20. Turn on the vehicle

    • The engine must be running while the vehicle is parked outside or in a well-ventilated area. Before getting started, familiarize yourself with and follow all applicable laws in your area.

21. Plug the USB drive into the same USB port used earlier in your vehicle

22. Select Settings on the Navigation Home Screen

23. Select Device

24. Select Update Map

25. Select Yes to continue

26. The screen will display Installing the updated map

27. Select OK after Update Successful message

28. Remove the USB drive from the USB port

To verify the maps were successfully installed:

In your Vehicle

1. Select Settings on the Where To? screen

2. Select Map & Vehicle

3. Select myMaps

The map region and version will display on the screen.

nulo

Honda Accord - 2018 and Newer - Click Here for Map Update Instructions:

The following is needed to perform the map update:

  • 16 GB USB Drive Only
    • The Honda Navigation System update requires a 16GB USB flash drive. Using a USB flash drive smaller or larger than 16GB can cause the map update process to be unsuccessful. The following error message may display: "There is not enough space on the device to install the map update from USB storage device."
    • Using the Same USB Flash Drive for the Honda Map Update
  • High-speed Internet connection
  • Up to 4 hours of time (Computer and Vehicle).  The map download time varies based on Internet connection speed and map region.
    • The map installation will take up to one hour in the vehicle but may vary based on the map region being installed.
    • During this update, your Honda navigation system must not be turned off. Therefore, the engine must be running while the vehicle is parked outside or in a well-ventilated area. Before getting started, familiarize yourself with and follow all applicable laws in your area. Please contact your dealer with any questions or concerns.

NOTE: You cannot use the same map download for multiple Honda navigation systems. Doing this will result in a locked navigation device.

Map Update Instructions:

On the Computer:

1. Format your USB drive to FAT32

    • NOTE: Steps 1 and 9 (using Garmin Express) must be done within 24 hours of each other when performing the map update. The update process will need to be restarted from the beginning if they are not completed within 24 hours.

2. Take the USB drive to your vehicle

In your Vehicle:

The following steps are required in order to imprint a unique ID to the flash drive.

3.  With the vehicle turned off, plug the 16 GB USB drive into the vehicle's USB port

    • Any USB port in the vehicle can be used. 

4. Turn on the vehicle and Select the Menu Button (3 dots) on the map screen

5. Select Settings

6. Select Map and Vehicle

7. Scroll down and select Map Updates

8. Select Start Update Process

9. Select OK and wait 60 seconds before removing the USB drive from the USB port

10. Remove the USB drive from the USB port in your vehicle and take it back to your computer

On the Computer:

11. Plug the USB drive into your computer

12. Open Garmin Express

13. Select Add a Device

    • If you've previously added your device to Garmin Express, select on your device and skip to step 16.
      • The green dot means Garmin Express recognizes the device.

14. Select Add a Device 

15. Select Next

    • If desired, enter your email address to register the device and receive map update notifications.

16. Select Next

    • If desired, enter a nickname for your vehicle

17. Select Install

    • Information about the available update can be found by clicking View Details

18. Select Accept after reading the terms and conditions

19. Select Continue after reading the important notes

    • Garmin Express will now display Preparing Device for Map Update and then Garmin Express is copying the map update files on to the USB drive

20. Safely remove the USB drive from the computer once the update process is completed and take the USB drive to your vehicle

In your Vehicle:

21. Turn on the vehicle

    • The engine must be running while the vehicle is parked outside or in a well-ventilated area. Before getting started, familiarize yourself with and follow all applicable laws in your area.

22. Plug the USB drive into the same USB port used earlier in your vehicle

23. Select the Menu Button (3 dots) on the map screen

24. Select Settings

25. Select Map and Vehicle

26. Scroll down and select Map Updates

27. Select Start Update Process

28. Follow the on-screen instructions to complete the map update

To verify the maps were successfully installed:

In your Vehicle

1. Select the Menu button (3 dots) on the map screen

2. Select Settings

3. Select Map and Vehicle

4. Select myMaps

myMaps Honda

The map region and version will display on the screen.

nulo

Honda Odyssey - 2018 and Newer - Click Here for Map Update Instructions:

The following is needed to perform the map update:

  • 16 GB USB Drive Only
    • The Honda Navigation System update requires a 16GB USB flash drive. Using a USB flash drive smaller or larger than 16GB can cause the map update process to be unsuccessful. The following error message may display: "There is not enough space on the device to install the map update from USB storage device."
    • Using the Same USB Flash Drive for the Honda Map Update
  • High-speed Internet connection
  • Up to 4 hours of time (Computer and Vehicle).  The map download time varies based on Internet connection speed and map region.
    • The map installation will take up to one hour in the vehicle but may vary based on the map region being installed.
    • During this update, your Honda navigation system must not be turned off. Therefore, the engine must be running while the vehicle is parked outside or in a well-ventilated area. Before getting started, familiarize yourself with and follow all applicable laws in your area. Please contact your dealer with any questions or concerns.

NOTE: You cannot use the same map download for multiple Honda navigation systems. Doing this will result in a locked navigation device.

Map Update Instructions:

On the Computer:

1. Format your USB drive to FAT32

    • NOTE: Steps 1 and 9 (using Garmin Express) must be done within 24 hours of each other when performing the map update. The update process will need to be restarted from the beginning if they are not completed within 24 hours.

2. Take the USB drive to your vehicle

In your Vehicle:

The following steps are required in order to imprint a unique ID to the flash drive.

3.  With the vehicle turned off, plug the 16 GB USB drive into the vehicle's USB port

    • 2018, 2019, and 2020 vehicles - Any USB port in the vehicle can be used. 
    • 2021 vehicles - The USB port in the front console must be used

4. Turn on the vehicle and Select the Menu Button (3 dots) on the map screen

5. Select Settings

6. Select Map and Vehicle

7. Scroll down and select Map Updates

8. Select Start Update Process

9. Select OK and wait 60 seconds before removing the USB drive from the USB port

10. Remove the USB drive from the USB port in your vehicle and take the USB drive back to your computer

On the Computer:

11. Plug the USB drive into your computer

12. Open Garmin Express

13. Select Add a Device

    • If you've previously added your device to Garmin Express, select on your device and skip to step 16.
      • The green dot means Garmin Express recognizes the device.

14. Select Add a Device 

15. Select Next

    • If desired, enter your email address to register the device and receive map update notifications.

16. Select Next

    • If desired, enter a nickname for your vehicle

17. Select Install

    • Information about the available update can be found by clicking View Details

18. Select Accept after reading the terms and conditions

19. Select Continue after reading the important notes

    • Garmin Express will now display Preparing Device for Map Update and then Garmin Express is copying the map update files on to the USB drive

20. Safely remove the USB drive from the computer once the update process is completed and take the USB drive back to your vehicle

In your Vehicle:

21. Turn on the vehicle

    • The engine must be running while the vehicle is parked outside or in a well-ventilated area. Before getting started, familiarize yourself with and follow all applicable laws in your area.

22. Plug the USB drive into the same USB port used earlier in your vehicle

23. Select the Menu Button (3 dots) on the map screen

24. Select Settings

25. Select Map and Vehicle

26. Scroll down and select Map Updates

27. Select Start Update Process

28. Follow the on-screen instructions to complete the map update

To verify the maps were successfully installed:

In your Vehicle:

1. Select the Menu button (3 dots) on the map screen

2. Select Settings

3. Select Map and Vehicle

4. Select myMaps

myMaps Honda

The map region and version will display on the screen.

nulo

Honda Insight - 2019 and Newer - Click Here for Map Update Instructions:

The following is needed to perform the map update:

  • 16 GB USB Drive Only
    • The Honda Navigation System update requires a 16GB USB flash drive. Using a USB flash drive smaller or larger than 16GB can cause the map update process to be unsuccessful. The following error message may display: "There is not enough space on the device to install the map update from USB storage device."
    • Using the Same USB Flash Drive for the Honda Map Update
  • High-speed Internet connection
  • Up to 4 hours of time (Computer and Vehicle).  The map download time varies based on Internet connection speed and map region.
    • The map installation will take up to one hour in the vehicle but may vary based on the map region being installed.
    • During this update, your Honda navigation system must not be turned off. Therefore, the engine must be running while the vehicle is parked outside or in a well-ventilated area. Before getting started, familiarize yourself with and follow all applicable laws in your area. Please contact your dealer with any questions or concerns.

NOTE: You cannot use the same map download for multiple Honda navigation systems. Doing this will result in a locked navigation device.

Map Update Instructions:

On the Computer:

1. Format your USB drive to FAT32

    • NOTE: Steps 1 and 9 (using Garmin Express) must be done within 24 hours of each other when performing the map update. The update process will need to be restarted from the beginning if they are not completed within 24 hours.

2. Take the USB drive to your vehicle

In your Vehicle:

The following steps are required in order to imprint a unique ID to the flash drive.

3.  With the vehicle turned off, plug the 16 GB USB drive into the vehicle's USB port

    • Any USB port in the vehicle can be used. 

4. Turn on the vehicle and Select the Menu Button (3 dots) on the map screen

5. Select Settings

6. Select Map and Vehicle

7. Scroll down and select Map Updates

8. Select Start Update Process

9. Select OK and wait 60 seconds before removing the USB drive from the USB port

10. Remove the USB drive from the USB port in your vehicle and take the USB drive back to your computer

On the Computer:

11. Plug the USB drive into your computer

12. Open Garmin Express

13. Select Add a Device

    • If you've previously added your device to Garmin Express, select on your device and skip to step 16.
      • The green dot means Garmin Express recognizes the device.

14. Select Add a Device 

15. Select Next

    • If desired, enter your email address to register the device and receive map update notifications.

16. Select Next

    • If desired, enter a nickname for your vehicle

17. Select Install

    • Information about the available update can be found by clicking View Details

18. Select Accept after reading the terms and conditions

19. Select Continue after reading the important notes

    • Garmin Express will now display Preparing Device for Map Update and then Garmin Express is copying the map update files on to the USB drive

20. Safely remove the USB drive from the computer once the update process is completed and take the USB drive back to your vehicle

In your Vehicle:

21. Turn on the vehicle

    • The engine must be running while the vehicle is parked outside or in a well-ventilated area. Before getting started, familiarize yourself with and follow all applicable laws in your area.

22. Plug the USB drive into the same USB port used earlier in your vehicle

23. Select the Menu Button (3 dots) on the map screen

24. Select Settings

25. Select Map and Vehicle

26. Scroll down and select Map Updates

27. Select Start Update Process

28. Follow the on-screen instructions to complete the map update

To verify the maps were successfully installed:

In your Vehicle:

1. Select the Menu button (3 dots) on the map screen

2. Select Settings

3. Select Map and Vehicle

4. Select myMaps

myMaps Honda

The map region and version will display on the screen.

nulo

Honda Passport - 2019 and Newer - Click Here for Map Update Instructions:

The following is needed to perform the map update:

  • 16 GB USB Drive Only
    • The Honda Navigation System update requires a 16GB USB flash drive. Using a USB flash drive smaller or larger than 16GB can cause the map update process to be unsuccessful. The following error message may display: "There is not enough space on the device to install the map update from USB storage device."
    • Using the Same USB Flash Drive for the Honda Map Update
  • High-speed Internet connection
  • Up to 4 hours of time (Computer and Vehicle).  The map download time varies based on Internet connection speed and map region.
    • The map installation will take up to one hour in the vehicle but may vary based on the map region being installed.
    • During this update, your Honda navigation system must not be turned off. Therefore, the engine must be running while the vehicle is parked outside or in a well-ventilated area. Before getting started, familiarize yourself with and follow all applicable laws in your area. Please contact your dealer with any questions or concerns.

NOTE: You cannot use the same map download for multiple Honda navigation systems. Doing this will result in a locked navigation device.

Map Update Instructions:

On the Computer:

1. Format your USB drive to FAT32

    • NOTE: Steps 1 and 9 (using Garmin Express) must be done within 24 hours of each other when performing the map update. The update process will need to be restarted from the beginning if they are not completed within 24 hours.

2. Take the USB drive to your vehicle

In your Vehicle:

The following steps are required in order to imprint a unique ID to the flash drive

3.  With the vehicle turned off, plug the 16 GB USB drive into the vehicle's USB port

    • 2019 and 2020 vehicles - Any USB port in the vehicle can be used. 
    • 2021 vehicles - The USB port in the front console must be used.

4. Turn on the vehicle and Select the Menu Button (3 dots) on the map screen

5. Select Settings

6. Select Map and Vehicle

7. Scroll down and select Map Updates

8. Select Start Update Process

9. Select OK and wait 60 seconds before removing the USB drive from the USB port

10. Remove the USB drive from the USB port in your vehicle and take the USB drive back to your computer

On the Computer:

11. Plug the USB drive into your computer

12. Open Garmin Express

13. Select Add a Device

    • If you've previously added your device to Garmin Express, select on your device and skip to step 16.
      • The green dot means Garmin Express recognizes the device.

14. Select Add a Device 

15. Select Next

    • If desired, enter your email address to register the device and receive map update notifications.

16. Select Next

    • If desired, enter a nickname for your vehicle

17. Select Install

    • Information about the available update can be found by clicking View Details

18. Select Accept after reading the terms and conditions

19. Select Continue after reading the important notes

    • Garmin Express will now display Preparing Device for Map Update and then Garmin Express is copying the map update files on to the USB drive

20. Safely remove the USB drive from the computer once the update process is completed and take the USB drive back to your computer

In your Vehicle:

21. Turn on the vehicle

    • The engine must be running while the vehicle is parked outside or in a well-ventilated area. Before getting started, familiarize yourself with and follow all applicable laws in your area.

22. Plug the USB drive into the same USB port used earlier in your vehicle

23. Select the Menu Button (3 dots) on the map screen

24. Select Settings

25. Select Map and Vehicle

26. Scroll down and select Map Updates

27. Select Start Update Process

28. Follow the on-screen instructions to complete the map update

To verify the maps were successfully installed:

In your Vehicle:

1. Select the Menu button (3 dots) on the map screen

2. Select Settings

3. Select Map and Vehicle

4. Select myMaps

myMaps Honda

The map region and version will display on the screen.

nulo

Honda Pilot - 2019 and Newer - Click Here for Map Update Instructions:

The following is needed to perform the map update:

  • 16 GB USB Drive Only
    • The Honda Navigation System update requires a 16GB USB flash drive. Using a USB flash drive smaller or larger than 16GB can cause the map update process to be unsuccessful. The following error message may display: "There is not enough space on the device to install the map update from USB storage device."
    • Using the Same USB Flash Drive for the Honda Map Update
  • High-speed Internet connection
  • Up to 4 hours of time (Computer and Vehicle).  The map download time varies based on Internet connection speed and map region.
    • The map installation will take up to one hour in the vehicle but may vary based on the map region being installed.
    • During this update, your Honda navigation system must not be turned off. Therefore, the engine must be running while the vehicle is parked outside or in a well-ventilated area. Before getting started, familiarize yourself with and follow all applicable laws in your area. Please contact your dealer with any questions or concerns.

NOTE: You cannot use the same map download for multiple Honda navigation systems. Doing this will result in a locked navigation device.

Map Update Instructions:

On the Computer:

1. Format your USB drive to FAT32

    • NOTE: Steps 1 and 9 (using Garmin Express) must be done within 24 hours of each other when performing the map update. The update process will need to be restarted from the beginning if they are not completed within 24 hours.

2. Take the USB drive to your vehicle

In your Vehicle:

The following steps are required in order to imprint a unique ID to the flash drive

3.  With the vehicle turned off, plug the 16 GB USB drive into the vehicle's USB port

    • 2019 and 2020 vehicles - Any USB port in the vehicle can be used. 
    • 2021 vehicles - The USB port in the front console must be used.

4. Turn on the vehicle and Select the Menu Button (3 dots) on the map screen

5. Select Settings

6. Select Map and Vehicle

7. Scroll down and select Map Updates

8. Select Start Update Process

9. Select OK and wait 60 seconds before removing the USB drive from the USB port

10. Remove the USB drive from the USB port in your vehicle and take the USB drive back to your computer

On the Computer:

11. Plug the USB drive into your computer

12. Open Garmin Express

13. Select Add a Device

    • If you've previously added your device to Garmin Express, select on your device and skip to step 16.
      • The green dot means Garmin Express recognizes the device.

14. Select Add a Device 

15. Select Next

    • If desired, enter your email address to register the device and receive map update notifications.

16. Select Next

    • If desired, enter a nickname for your vehicle

17. Select Install

    • Information about the available update can be found by clicking View Details

18. Select Accept after reading the terms and conditions

19. Select Continue after reading the important notes

    • Garmin Express will now display Preparing Device for Map Update and then Garmin Express is copying the map update files on to the USB drive

20. Safely remove the USB drive from the computer once the update process is completed and take the USB drive back to your vehicle

In your Vehicle:

21. Turn on the vehicle

    • The engine must be running while the vehicle is parked outside or in a well-ventilated area. Before getting started, familiarize yourself with and follow all applicable laws in your area.

22. Plug the USB drive into the same USB port used earlier in your vehicle

23. Select the Menu Button (3 dots) on the map screen

24. Select Settings

25. Select Map and Vehicle

26. Scroll down and select Map Updates

27. Select Start Update Process

28. Follow the on-screen instructions to complete the map update

To verify the maps were successfully installed:

In your Vehicle:

1. Select the Menu button (3 dots) on the map screen

2. Select Settings

3. Select Map and Vehicle

4. Select myMaps

myMaps Honda

The map region and version will display on the screen.

nulo

Relacionado

Ponte en contacto con nosotros para obtener ayuda adicional