"Error on reflashing" when Trying to Update the Chrysler Uconnect Navigation System

Follow the steps below to let the vehicle do a full power cycle/sleep cycle if you receive the message "Error on reflashing" when trying to update the software or maps on your Chrysler, Dodge, Jeep, or RAM Uconnect system:

1. Make sure all the vehicle lights are off
   • If your vehicle has a push button or keyless start, make sure the FOB is out of range of the vehicle.
2. Shut down the vehicle
3. Open and shut the vehicle door
   • If your vehicle has a keyless ignition system, you will need to exit the proximity of the vehicle.
4. Wait for at least 5 minutes
5. Start the vehicle
6. Try updating the map again

The update should continue.

Contact your dealer if this does not correct the issue.