Customizing the Sounds on the Upland Beeper

The Delta Upland™ Beeper can operate under a variety of sound combinations or modes.

These include a series of beeps when the dog is hunting and a hawk scream or a beep when on point:

• HUNT Mode – The Beeper sounds every 4 seconds while the dog is moving.
• POINT Mode – The Beeper sounds once every second while the dog is on point. The hawk scream sounds every five seconds.
• HUNT Mode and POINT Mode can be set with eight pre-set combinations that you select.

To check the current Beeper setting:

1. Power on the Beeper
2. To decrease the sound, place your thumb over the speaker hole
3. To hear the HUNT setting, gently shake the Beeper (to simulate a running dog)
4. To hear the POINT setting, hold the Beeper still.

To select a specific Beeper mode:

1. Power on the Beeper
2. Press and hold Power
3. Wait until both LED lights blink three times
4. Release Power (The LED lights will indicate the current setting*)
5. Tap Power to cycle to the desired mode
6. Save your selection:
   1. Press and hold the Power Select button
   2. Wait until both LED lights flash three times
   3. Release Power

The Beeper will now operate in the mode you have selected.

* Mode Setting Cycle chart