Select your product to confirm this information applies to you
Connecting the Handlebar Controller to a Compatible Automotive Device
See the owner's manual for instructions to install the Handlebar Controller.
Connecting to the Handlebar Controller requires use of an accessory connector. See the device list below for details on what additional accessory purchases are required.
NOTE: The original Tread® and zūmo® XT GPS navigators are not compatible with the Handlebar Controller.
Tread® 2 GPS Navigator
No additional accessories required.
The included power cable has the accessory connector built-in.
A software update may be required.
Tread® - Overland Edition | Tread® XL - Overland Edition | Tread® XL - Baja Chase Edition GPS Navigators
Requires additional purchase of Handlebar Controller and Group Ride Radio Y-Adapter Cable (8/10" devices)
If you previously purchased the Group Ride Radio (6", 8" and 10"), you don't need this cable since it comes with the appropriate accessory connector.
A software update may be required.
For the Tread - Overland Edition and Tread XL - Overland Edition, see Wireless Map and Software Update Instructions.
For the Tread XL - Baja Chase Edition, see Wireless Map and Software Update Instructions.
Tread® - SxS Edition GPS Navigator
No additional accessories required.
The included power cable has the accessory connector built-in.
A software update may be required.
zūmo® XT2 GPS Navigator
Requires additional purchase of the Handlebar Controller and Group Ride Radio Y-Adapter Kit (6" Devices)
If you previously purchased the Group Ride Radio (6", 8" and 10"), you may have already purchased the Group Ride Radio Y-adapter Cable and the High-Current Power Cable. These cables will also complete the solution.
A software update may be required.