Select your product to confirm this information applies to you
Vector 3 and Vector 3S Status LED Lights
The Vector 3 and Vector 3S system features status LEDs on the end of the spindle located on the inside of each crank arm.*
LED Light Status | Pedal Status | Troubleshooting Tips |
1 red flash | The Vector system is active and working properly. | None |
3 green flashes every 10 seconds | The pedal is searching for the other pedal. | Confirm opposite pedal has good batteries and pedal is in working condition |
Alternating red and green flashes | A software update is in progress. | Wait for software update to finish installing |
20 green flashes | The software update was successful. The pedals found each other successfully and are up to date. | None |
20 red flashes | The software update failed. The left pedal could not find the right pedal or failed to update the right pedal. | Reapply software update |
*Vector 3S will only have a status LED on the left pedal.
*The Vector 3 and Vector 3S system does not flash an LED when the batteries are low. This is done to save battery life.