Upgrading a GHP 20 to the Reactor 40

If you currently own an GHP 20, but would like to upgrade to the GHP Reactor, you would need to do the following:

Notes:
   • If the boat currently has a GHC 10, it needs to be replace with a GHC 20 or GHC 50. The GHP Reactor is not compatible with the GHC 10.
   • If the GHP SmartPump is upgraded for a SmartPump Version 2 and  the boat has a GHP 20 CCU "Compass Ball", the GHP 20 CCU is not compatible wit the SmartPump V2 upgrade the GHP 20 CCU with a Reactor 40 .

GHP 20 SmartPump

Required Parts

• Reactor 40 part # 010-11052-67

• Interconnect Cable part # 010-11351-40

• GHC 20 part # 010-01141-00 or the GHC 50  part # 010-02731-00

Installation Overview

• Replace the GHP 20 CCU with the Reactor 40

• Replace GHP 20 interconnect cable with the Reactor 40 interconnect cable

• Connect the Reactor 40 to NMEA 2000 using existing cable

• Connect the Shadow drive to the Reactor 40

• Connect the buzzer to the Reactor 40

• Leave tach wires unconnected

• Leave yellow wire from GHC unconnected

GHP 20 Steer-By-Wire

Required Parts

• Reactor 40 (Steer-by-Wire & Yamaha Helm Master) - 010-11052-65

• GHC 20: 010-01141-00

Installation Overview

• Replace the GHP 20 CCU with the Reactor 40

• Connect the interconnect cable to the Reactor 40 using existing cable

• Connect the Reactor 40 to NMEA 2000 using existing cable

These parts can be purchased from any Garmin Marine Dealer. Find a local dealer with the Dealer Locator Tool.