Garmin Chartplotter Requirements to Commission the Reactor™ Autopilot

A Garmin chartplotter with software 4.50 or higher can commission the Reactor™ marine autopilot systems. Directions for commissioning the autopilot are found in the Configure Manual for the Garmin marine autopilot systems. 

The following Garmin chartplotters do not require a GHC™ autopilot helm controller  to commission the autopilot system:

• GPSMAP® 90xx chartplotter | GPSMAP® 92xx chartplotter

• GPSMAP® 86xx  chartplotter | GPSMAP® 84xx chartplotter

• GPSMAP® 8530 chartplotter| GPSMAP® 8500 chartplotter

• GPSMAP® 82xx chartplotter | GPSMAP® 80xx chartplotter

• GPSMAP® 76xx chartplotter | GPSMAP® 74xx chartplotter

• GPSMAP® 10x2 chartplotter | GPSMAP® 12x2 chartplotter

• GPSMAP® 7x2 chartplotter | GPSMAP® 9x2 chartplotter

• GPSMAP® 7x3 chartplotter | GPSMAP® 9x3 chartplotter | GPSMAP® 12x3 chartplotter | GPSMAP® 16x3 chartplotter 

• ECHOMAP™ Plus 64cv chartplotter | ECHOMAP™ Plus 7x chartplotter |ECHOMAP™ Plus 9xchartplotter

• ECHOMAP™ UHD 6x chartplotter | UHD 7x chartplotter | ECHOMAP™ UHD 9x chartplotter

• ECHOMAP™ UHD2 6Xsv | UHD2 7Xsv | UHD2 9Xsv

• ECHOMAP™ Ultra chartplotters

• ECHOMAP™ Ultra 2 chartplotters

• Yamaha CL7

All other Garmin chartplotters will require a GHC dependent on the autopilot system installed.

Notes: 
• The ECHOMAP™ Plus 63cv does not have a NMEA 2000 port
• The ECHOMAP™ Plus 64cv and UHD 6x chartplotters require the use of a 4-pin Female to 5-pin Male NMEA 2000 Adapter Cable (010-12445-10)